Overview
Manuals
Physical info
Primary Application
Features:
- 190501 Velomitor CT Transducer
- 1/2-in NPT conduit adapter
- Parameters are specified from +20°C to +30°C (+68°F to +86°F) and 100 Hz unless otherwise indicated
The Velomitor CT Velocity Transducer is a low-frequency version of our standard Velomitor Piezo-velocity Sensor. Its design specifically measures casing vibration velocity on cooling tower and air-cooled heat-exchanger fan assemblies that operate at or above 90 rpm (100 to 300 rpm typical).
The Velomitor CT Transducer can measure vibration amplitudes at these frequencies as well as the vibration frequencies generated by the fan motor and speed reducer.
The 128608-02 Bently Nevada 1/2-in NPT conduit adapter may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 128608-02 1/2-in NPT conduit adapter Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Mounting Surface: 33 mm diameter (1.3 in diameter).
Height: 82 mm (3.2 in).
Case Material: 316L stainless steel
Connector: 2-pin 316L stainless steel MIL-C-5015, top.
Mounting Torque: 4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf).
Polarity: Pin A goes positive with respect to Pin B when velocity is from base to top of the transducer.
Mounting Angle: Any orientation.
Recommended Cable Length: 219 m (720 ft ) Assuming max vibration of 4 in/s, frequency 1 kHz, and cable capacitance 200 pf/m. For longer lengths, contact Bently Nevada Tech Support.
According to the official datasheet for the Bently Nevada 190501 Velomitor CT, this adapter is the standard mounting hardware for the 190501 Velomitor CT (cooling tower) velocity sensor. The Velomitor CT is used to measure low-frequency casing vibrations in low-speed operating equipment such as induced draft cooling towers and air-cooled heat exchangers.
