Overview
Manuals
Principle
Core Application
Features:
- Proximity Probe Housing Assemblies
- 31000 and 32000 Proximity Probe Housing Assemblies
- The 31000/32000 Proximity Probe Housing Assembly is made of polyphenylene sulfide (PPS)
When proximity probes need to be mounted inside a machine housing, the 31000/32000 type proximity probe housing assembly is recommended. This assembly is typically used for radially mounted sensors, whether for vibration or key phase measurements. Using a proximity probe housing allows for easy external access to the proximity probe and its extension cables, enabling gap adjustment or probe replacement without disassembling the machine.
The 31000/32000 type proximity probe housing assembly is made of polyphenylene sulfide (PPS), an advanced high-strength thermoplastic material with excellent corrosion resistance. Other components of the housing assembly are made of corrosion-resistant stainless steel. Versions of this housing assembly pre-installed with the 3300 XL type proximity probe and various conduit fittings are available by order.
The 32000-28-05-05-110-03-02 Bently Nevada Proximity Probe Housing Assemblies may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 32000-28-05-05-110-03-02 Proximity Probe Housing Assemblies Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 31000/32000 type proximity probe housing assembly fully complies with the American Petroleum Institute (API) 670 standard requirements for externally mounted proximity probe housings. When installed with an approved sensor system and appropriate I.S. barriers, the 31000/32000 proximity probe housing assembly can be used for intrinsically safe hazardous area applications.
The primary purpose of this component is to allow external access to the proximity probe for gap adjustment or replacement without disassembling the machine. It is typically used for:
Radial Vibration Monitoring: Measuring the dynamic movement of a shaft relative to a bearing housing.
Key Phasor Measurement: Providing a timing signal once per revolution for velocity and phase analysis.
Environmental Protection: Protecting the probe and its connector from mechanical damage, moisture, and industrial contaminants (IP66/NEMA 4X protection rating).
