Overview
Manuals
Key Features
Key Industry Use Cases
Features:
- 3300 XL 8 mm Proximity Probes
- 3300 XL 8 mm Proximity Transducer System
- 330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other nonXL 3300 series 5 mm and 8 mm transducer system components5. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
The 330101-00-10-15-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-10-15-02-05 3300 XL 8 mm Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Thin-film bearing caps and seals: Commonly used in applications where the housing metal is thin, such as end caps for small process pumps, compact fans, or high-speed blowers.
Embedded external mounting: Used when the probe must be flush with or slightly recessed from the machine housing to prevent cuts from adjacent machine supports, piping, or safety guards.
Isolated coaxial connection: Provides sufficient length to fully expose the cable to the oil mist environment within the bearing housing before connecting the connector.
Field junction box direct lead: In compact skid-mounted equipment, a 1.5-meter cable can typically be run directly from the sensor thread to the external conduit junction box without intermediate joints.
Upstream and downstream oil and gas industries: Certified to operate near volatile hydrocarbon processes, drilling platforms, and fuel processing stations (Class I, Zone 1/0/1).
Chemical plants: Resistant to static buildup, allowing operation in environments with persistent explosive gases.
