Overview
Manuals
Compatibility Review
Field Installation Notes
Configuration Breakdown
Features:
- 3300 XL 8 mm: 330101-02-60-05-01-05 belongs to the documented manufacturer product family.
- Configuration: 0.2 in unthreaded length, 6.0 in case, 0.5 m total cable, ClickLoc connector with protector and standard cable option 01, and multiple approvals option 05.
- Verification: Confirm all 02-60-05-01-05 suffixes and the required total transducer-system length before replacement.
Bently Nevada 330101-02-60-05-01-05 is 3/8-24 unf proximity probe without armor designed for Bently Nevada 3300 XL 8 mm proximity transducer systems. According to the official manufacturer documentation, it provides non-contact shaft vibration and position measurement with a matched extension cable and Proximitor Sensor. The ordering identity records 0.2 in unthreaded length, 6.0 in case, 0.5 m total cable, ClickLoc connector with protector and standard cable option 01, and multiple approvals option 05, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330101-02-60-05-01-05 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the 3300 XL 8 mm cable and Proximitor Sensor, total electrical length, target, thread, and approvals.
The Bently Nevada 330101-02-60-05-01-05 3/8-24 UNF proximity probe without armor is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330101-02-60-05-01-05 3/8-24 UNF proximity probe without armor manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compatibility Review
Confirm the 3300 XL 8 mm cable and Proximitor Sensor, total electrical length, target, thread, and approvals. Compare the complete 330101-02-60-05-01-05 ordering code and nameplate data with the installed item before purchase.
Field Installation Notes
Follow the manufacturer instructions and verify probe gap, 3/8-24 thread engagement, connector protector, cable routing, and system-length matching. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Configuration Breakdown
0.2 in unthreaded length, 6.0 in case, 0.5 m total cable, ClickLoc connector with protector and standard cable option 01, and multiple approvals option 05. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
