Overview
Manuals
Matched Components
Maintenance Preparation
Suffix Interpretation
Features:
- 3300 5 mm: 330172-00-08-10-01-05 belongs to the documented manufacturer product family.
- Configuration: 0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, armor, and multiple approvals option 05.
- Verification: Confirm all 00-08-10-01-05 suffixes, armor, case length, connector protector, cable, and total system length before replacement.
Bently Nevada 330172-00-08-10-01-05 is armored 1/4-28 unf proximity probe designed for Bently Nevada 3300 5 mm proximity transducer systems. According to the official manufacturer documentation, it provides the same 2 mm linear measurement range as the 8 mm system where mounting space is restricted. The ordering identity records 0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, armor, and multiple approvals option 05, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330172-00-08-10-01-05 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the 3300 XL extension cable, compatible Proximitor Sensor, 5 m or 9 m total length, target, thread, and approvals.
The Bently Nevada 330172-00-08-10-01-05 armored 1/4-28 UNF proximity probe is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330172-00-08-10-01-05 armored 1/4-28 UNF proximity probe manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Matched Components
Confirm the 3300 XL extension cable, compatible Proximitor Sensor, 5 m or 9 m total length, target, thread, and approvals. Compare the complete 330172-00-08-10-01-05 ordering code and nameplate data with the installed item before purchase.
Maintenance Preparation
Follow the manufacturer instructions and verify 1/4-28 thread engagement, probe gap, cable armor routing, connector protection, and matched system length. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Suffix Interpretation
0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, armor, and multiple approvals option 05. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
