Overview
Manuals
Matched Components
Maintenance Preparation
Suffix Interpretation
Features:
- 3300 XL 8 mm metric: 330103-00-16-05-11-05 belongs to the documented manufacturer product family.
- Configuration: 0 mm unthreaded length, 160 mm case, 0.5 m total cable, FluidLoc cable with connector protector option 11, and multiple approvals option 05.
- Verification: Confirm all 00-16-05-11-05 suffixes, FluidLoc cable, protector, metric thread, and system length before replacement.
Bently Nevada 330103-00-16-05-11-05 is m10 x 1 fluidloc proximity probe without armor designed for fluid-resistant Bently Nevada 3300 XL 8 mm proximity transducer systems. According to the official manufacturer documentation, it provides non-contact shaft vibration and position measurement with a FluidLoc cable and protected ClickLoc connector. The ordering identity records 0 mm unthreaded length, 160 mm case, 0.5 m total cable, FluidLoc cable with connector protector option 11, and multiple approvals option 05, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330103-00-16-05-11-05 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the M10 x 1 mounting, FluidLoc extension cable configuration, Proximitor Sensor, total length, target, and approvals.
The Bently Nevada 330103-00-16-05-11-05 M10 x 1 FluidLoc proximity probe without armor is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330103-00-16-05-11-05 M10 x 1 FluidLoc proximity probe without armor manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Matched Components
Confirm the M10 x 1 mounting, FluidLoc extension cable configuration, Proximitor Sensor, total length, target, and approvals. Compare the complete 330103-00-16-05-11-05 ordering code and nameplate data with the installed item before purchase.
Maintenance Preparation
Follow the manufacturer instructions and verify metric thread engagement, probe gap, fluid-resistant connector protection, cable routing, and system matching. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Suffix Interpretation
0 mm unthreaded length, 160 mm case, 0.5 m total cable, FluidLoc cable with connector protector option 11, and multiple approvals option 05. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
