Overview
Manuals
System Matching
Installation Planning
Ordering-Code Reference
Features:
- PROXPAC XL: 330881-16-10-100-03-02 belongs to the documented manufacturer product family.
- Configuration: 8 mm probe option 16 without approvals, 100 mm standoff, 100 mm penetration, one M20 cable fitting with two plugs, and 3/4-14 NPT mounting thread.
- Verification: Confirm all 16-10-100-03-02 suffixes, probe option, standoff, penetration, cable fittings, and mounting thread before replacement.
Bently Nevada 330881-16-10-100-03-02 is self-contained 3300 xl 8 mm proximity transducer assembly designed for harsh-environment machinery proximity measurement installations. According to the official manufacturer documentation, it combines a weatherproof probe housing, probe, extension cable and Proximitor Sensor into one field assembly. The ordering identity records 8 mm probe option 16 without approvals, 100 mm standoff, 100 mm penetration, one M20 cable fitting with two plugs, and 3/4-14 NPT mounting thread, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330881-16-10-100-03-02 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the target material, probe gap, penetration, mounting thread, field wiring, and required hazardous-area approval.
The Bently Nevada 330881-16-10-100-03-02 self-contained 3300 XL 8 mm proximity transducer assembly is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330881-16-10-100-03-02 self-contained 3300 XL 8 mm proximity transducer assembly manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
System Matching
Confirm the target material, probe gap, penetration, mounting thread, field wiring, and required hazardous-area approval. Compare the complete 330881-16-10-100-03-02 ordering code and nameplate data with the installed item before purchase.
Installation Planning
Follow the manufacturer instructions and verify housing orientation, NPT thread, probe gap, conduit entries, grounding, and environmental sealing. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Ordering-Code Reference
8 mm probe option 16 without approvals, 100 mm standoff, 100 mm penetration, one M20 cable fitting with two plugs, and 3/4-14 NPT mounting thread. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
