Overview
Manuals
Probe Geometry
Armor & Cable
Gap & Bias Checks
Features:
- Designed for the 3300 XL 8 mm family and intended for use with the corresponding Bently Nevada 3300 transducer-system components.
- The documented mounting thread is 3/8-24 UNF; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented armor configuration is Stainless-steel armor; preserve this construction together with the complete order code and cable-routing requirements.
330102-00-80-10-01-05 is a Bently Nevada 3300 XL 8 mm Proximity Probe for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Probe family: 3300 XL 8 mm; Mounting thread: 3/8-24 UNF. Match the full order code and hardware before replacement.
330102-00-80-10-01-05 is an armored 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, 203.2 mm case, 1.0 m total length and Protected standard ClickLoc. Match the calibrated probe, extension cable and Proximitor sensor before commissioning.
The exact 330102-00-80-10-01-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330102-00-80-10-01-05 3300 XL 8 mm Proximity Probe manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330102-00-80-10-01-05. Retained facts: Probe family: 3300 XL 8 mm; Mounting thread: 3/8-24 UNF; Armor: Stainless-steel armor. Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
