Overview
Manuals
Signal Conditioning
Probe & Cable Match
Bias Commissioning
Features:
- The documented total length is X1 system length; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented mounting is DIN mount; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented agency approval is CSA, ATEX, IECEx Approvals; the complete approval suffix must match the installation area and site requirements.
330180-X1-05 MOD: 145004-09 is a Bently Nevada 3300 XL Proximitor Sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Total Length: X1 system length; Mounting: DIN mount. Match the full order code and hardware before replacement.
The Bentley Nevada 330180-X1-05 MOD: 145004-09 is a preamplifier specifically designed for the 3300 XL 5mm/8mm eddy current displacement sensor system. It features DIN rail mounting (X1) and CSA/NRTL/C explosion-proof certification (05), and has been specifically recalibrated for target materials for standard 9-meter systems. This module, used with the 3300 XL probe and extension cable, is widely applicable for the precise monitoring of shaft vibration, eccentricity, and axial displacement in rotating machinery such as steam turbines and compressors.
The exact 330180-X1-05 MOD: 145004-09 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330180-X1-05 MOD: 145004-09 3300 XL Proximitor Sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330180-X1-05 MOD: 145004-09 only with the documented signal type and connection arrangement. Retained facts: Total Length: X1 system length; Mounting: DIN mount; Agency Approval: CSA, ATEX, IECEx Approvals. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
