Overview
Manuals
Adjustment Range
Probe Calibration Fit
Service Procedure
Features:
- The documented scale units is Micrometer in metric units (0- 25 mm); use this value when checking the monitor configuration, operating limits and expected measurement response.
- The documented casing material is Fiberglass and Plastic; verify this construction against the machine environment, mounting arrangement and required protection level.
- The documented isfactual is ±5mV/mil; retain this specification when matching the exact 3300 xl precision micrometer and installed Bently Nevada 3300 hardware.
330185-02 is a Bently Nevada 3300 XL Precision Micrometer for the 3300 system. It supports probe setup, displacement checks and service verification. Key specifications: Scale Units: Micrometer in metric units (0- 25 mm); Casing Material: Fiberglass and Plastic. Match the full order code and hardware before replacement.
The Bentley Nevada 330185-02 is a 0-25 mm metric precision micrometer calibrator designed specifically for the 3300 XL eddy current sensor system. It is designed to achieve high-precision static calibration of linear range, average nominal sensitivity (ASF), and preamplifier output profile. Equipped with a high-precision AISI 4140 steel target and mounting adapter, it meets the high resolution and full-scale accuracy requirements specified in API 670.
The exact 330185-02 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330185-02 3300 XL Precision Micrometer manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330185-02 only with the documented signal type and connection arrangement. Retained facts: Scale Units: Micrometer in metric units (0- 25 mm); Casing Material: Fiberglass and Plastic; ISFActual: ±5mV/mil. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
