Overview
Manuals
Basic
Ordering Considerations
Industrial Performance Standards
Features:
- 3300 NSv Proximity Probes
- 330905 3300 NSv Probe, M10X1 thread, without armor
- 3300 XL NSv Proximity Transducer System
The 3300 XL NSv Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with tight installation requirements.
The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).
The 330905-00-11-05-02-00 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330905-00-11-05-02-00 3300 NSv Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 330905-00-11-05-02-00
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 3300 XL NSv Proximity Transducer System
3300 NSv Proximity Probes
3300 NSv Probe, M10X1 thread, without armor
330905-Axx-Bxx-Cxx-Dxx-Exx
A: Unthreaded Length
Order in increments of 10 mm.
Length configuration:
Maximum unthreaded length: 230 mm
Minimum unthreaded length: 0 mm
Example: 06 = 60 mm
B: Overall Case Length
Order in increments of 10 mm.
Metric thread configurations:
Maximum length: 250 mm
Minimum length: 20 mm
Example: 06 = 60 mm
C: Total Length
05: 0.5 meter (20 in)
10: 1.0 meter (39 in)
50: 5.0 meters (16.4 feet)
70: 7.0 meters (23.0 feet)
D: Connector and Cable-Type
01: Miniature coaxial ClickLoc connector with connector protector, standard cable
02: Miniature coaxial ClickLoc connector, standard cable
11: Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
12: Miniature coaxial ClickLoc connector, FluidLoc cable
E: Agency Approval
00: Not required
05: Multiple Approvals
Configuration code 330905-00-11-05-02-00 specifies the Bently Nevada 3300 XL NSv proximity probe, designed for demanding, high-availability industrial environments. Because the part number ends in -00, this stand-alone probe does not have independent hazardous site certifications (such as ATEX, IECEx, or CSA Class I Division 1). It is optimized for standard non-explosive industrial installations and complies with globally recognized structural and electrical engineering standards.
API 670 Standard: Designed entirely in accordance with the American Petroleum Institute (API) API 670 Guidelines for Mechanical Protection. It maintains a high-accuracy incremental scaling factor (ISF) of 7.87 V/mm (200 mV/mil) and a best-fit straight-line deviation (DSL) of less than ±0.06 mm (±2.3 mil), eliminating the need for field recalibration.
CE Marking Compliance: When installed in a fully shielded 3300 XL NSv circuit, this product complies with all European CE directives regarding electromagnetic compatibility (EMC) and low-voltage industrial safety requirements.
RoHS/REACH: This product is manufactured using materials that comply with major international environmental directives that restrict the use of hazardous substances in commercial electrical equipment.
