Overview
Manuals
Compatibility Review
Field Installation Notes
Configuration Breakdown
Features:
- 3300 XL 11 mm: 330780-90-05 belongs to the documented manufacturer product family.
- Configuration: 9.0 m total system length, panel mounting option 90, multiple approvals option 05, 3.94 V/mm scale factor, and 4.0 mm linear range.
- Verification: Confirm the complete 330780-90-05 code, 9 m system length, panel mount, approval option, matched probe and cable before replacement.
Bently Nevada 330780-90-05 is 9 m panel-mount proximitor sensor designed for Bently Nevada 3300 XL 11 mm proximity transducer systems. According to the official manufacturer documentation, it converts probe gap changes into proportional voltage for large-linear-range vibration and position measurements. The ordering identity records 9.0 m total system length, panel mounting option 90, multiple approvals option 05, 3.94 V/mm scale factor, and 4.0 mm linear range, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330780-90-05 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the 3300 XL 11 mm probe, extension cable, 9 m total system length, target material, and monitor input.
The Bently Nevada 330780-90-05 9 m panel-mount Proximitor Sensor is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330780-90-05 9 m panel-mount Proximitor Sensor manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compatibility Review
Confirm the 3300 XL 11 mm probe, extension cable, 9 m total system length, target material, and monitor input. Compare the complete 330780-90-05 ordering code and nameplate data with the installed item before purchase.
Field Installation Notes
Follow the manufacturer instructions and verify panel mounting, -17.5 to -26 Vdc power, shielded field wiring, system-length matching, and probe gap. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Configuration Breakdown
9.0 m total system length, panel mounting option 90, multiple approvals option 05, 3.94 V/mm scale factor, and 4.0 mm linear range. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
