Overview
Manuals
AC Pairing
Dual Supply
AC Upgrade
Features:
- Legacy AC front supply uses separately specified high- and low-voltage power input modules; the front number alone does not select the mains range.
- Either installed supply can support a complete rack, with the lower position serving as primary and the upper as backup in a two-supply configuration.
- A move to the universal AC design requires a matched 106M1079-01 supply and 106M1081-01 input module; old and new AC halves are not compatible.
The 3500/15 127610-01 is the legacy AC power supply front module documented for the Bently Nevada 3500 machinery-protection rack. It occupies a dedicated half-height position on the left side and works with a separately identified power input module. The high-voltage and low-voltage AC input arrangements use different PIM numbers, so the mains range cannot be inferred from the front supply number alone. The rack can accommodate one or two supplies; either supply can power a complete rack, and a two-supply arrangement provides primary and backup positions. A Supply OK indicator reports supply operation. Hardware revisions affect the permitted upper input voltage on older installations. The later universal-AC design is a different matched supply-and-PIM combination, making both rear-module identity and revision information essential when selecting a replacement.
Manufacturer reference: Bently Nevada 141530-01 Rev. F (legacy AC) and 141530 Rev. P (replacement architecture). The front-module part number does not automatically include the rear I/O module, accessories or installation approval.
The Bently Nevada 3500/15 127610-01 is supported by Moore Automated for exact-item replacement and spare-part enquiries.
Bently Nevada 3500/15 127610-01 AC power supply module manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
127610-01 pairs with 125840-01 for high-voltage AC or 125840-02 for low-voltage AC. Confirm both hardware revisions before applying the datasheet voltage range.
The lower supply is primary and the upper is backup when two are installed. Continuity during removal of either unit requires another correctly installed supply and the documented service procedure.
A universal-AC conversion uses 106M1079-01 together with 106M1081-01. The manufacturer warns against interchanging individual legacy and universal front or input modules.
