Overview
Manuals
Signal and Power
Configuration Details
Commissioning Guidance
Features:
- 991 Thrust Transmitter System
- 0.6 mm Bidirectional Range
- 7.0 m System Length
- 4 to 20 mA Output
- Multiple Agency Approvals
The Bently Nevada 991-06-70-02-05 is a loop-powered thrust transmitter system for continuous axial position measurement. It combines a matched NSv transducer chain with a 4 to 20 mA interface for plant monitoring and control equipment.
This configuration provides a 0.6 mm bidirectional range, 7.0-meter system length, bulkhead mounting and multiple approvals. Check the complete code when replacing the transmitter, probe or extension cable.
The 991-06-70-02-05 Bently Nevada 991 thrust transmitter system may be supplied and supported by Moore Automated according to the stated OEM lifecycle and confirmed stock condition.
Bently Nevada 991-06-70-02-05 991 thrust transmitter system Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Signal and Power:
- 4 to 20 mA loop output
- 12 to 35 VDC supply
- ±1.5% stated accuracy
- Maximum 1,000 ohm loop at 35 VDC
Verify the receiving input, available loop voltage and total loop resistance before energizing the transmitter.
Configuration Details:
- 06: 0.6 mm bidirectional range
- 70: 7.0 m system length
- 02: bulkhead mounting
- 05: multiple agency approvals
The complete four-field suffix determines the measuring span, matched electrical length, mounting arrangement and certification option.
Commissioning Guidance:
- Match the NSv probe and extension cable
- Use a target at least 9.5 mm in diameter
- Confirm bulkhead mounting clearances
- Check loop polarity and resistance
- Verify approval drawings before use
Commission the complete loop by confirming the mechanical gap, PROX output, 4 to 20 mA response and control-system scaling.
