Overview
Manuals
Power Path
Architecture Fit
Loop Testing
Features:
- PLC Power Supply Module for the documented GE Fanuc Series 90-30.
- Load capacity: 30 Watts.
- Nominal Rated Voltage: 24VDC / 48VDC.
IC693PWR331D belongs to the GE Fanuc Series 90-30 and performs the documented plc power supply module role in the GE Fanuc Series 90-30 PLC architecture. The retained technical evidence records Load capacity: 30 Watts; Nominal Rated Voltage: 24VDC / 48VDC; Input Voltage Range, DC: Start: 21 to 56 VDC Run: 18 to 56 VDC. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Fanuc Series 90-30 receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The IC693PWR331D PLC Power Supply Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE IC693PWR331D PLC Power Supply Module Manual(Datasheets), Link
Important Notice: No verified exact-model PDF was available when this page was reviewed. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Power Path: IC693PWR331D performs the plc power supply module function within the GE Fanuc Series 90-30. The retained documentation identifies load capacity as 30 Watts; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Architecture Fit: approve IC693PWR331D only for the documented GE Fanuc Series 90-30 PLC architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Loop Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing IC693PWR331D.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
