Overview
Manuals
Board Setup
Platform Fit
Startup Review
Features:
- Turbine Control Board for the documented GE Mark V and Mark VI Speedtronic.
- System family: Mark V.
- Board function: DC power-supply conversion.
DS200TCPSG1ARE belongs to the GE Mark V and Mark VI Speedtronic and performs the documented turbine control board role in the GE Speedtronic Mark V and Mark VI turbine-control architecture. The retained technical evidence records System family: Mark V; Board function: DC power-supply conversion; Hardware form: Power-supply board. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Mark V and Mark VI Speedtronic receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The DS200TCPSG1ARE Turbine Control Board is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE DS200TCPSG1ARE Turbine Control Board Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Board Setup: DS200TCPSG1ARE performs the turbine control board function within the GE Mark V and Mark VI Speedtronic. The retained documentation identifies system family as Mark V; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Fit: approve DS200TCPSG1ARE only for the documented GE Speedtronic Mark V and Mark VI turbine-control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing DS200TCPSG1ARE.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
