Overview
Manual
Power Architecture
Transfer Performance
Rack Installation
Features:
- Product type: Rack automatic transfer switch
- Nominal input voltage: 230 V AC
- Acceptable input voltage: ±10% of nominal
Schneider Electric AP4423 is an APC rack automatic transfer switch that supplies redundant power to single-corded rack equipment from two independent AC sources.
The 1U unit has two C20 inlets and distributes power through eight C13 outlets and one C19 outlet at 230 V, 50/60 Hz. It supports 16 A total input/output current and transfers in a maximum of 10 ms at high sensitivity or 12 ms at low sensitivity.
Integrated network management supports Web, Telnet, SNMP, SSH and Data Center Expert interfaces. The AP4423 was discontinued by Schneider Electric on June 9, 2023; AP4423A is the identified replacement.
The Schneider Electric AP4423 may be supplied and supported by Moore Automated according to the official product lifecycle: Obsolete/Discontinued by OEM.
Schneider Electric AP4423 APC rack automatic transfer switch Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses and related items are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Technical details:
- Product type: Rack automatic transfer switch
- Nominal input voltage: 230 V AC
- Acceptable input voltage: ±10% of nominal
- Input frequency: 50/60 Hz
- Input connectors: 2 × IEC C20
- Output connectors: 8 × IEC C13; 1 × IEC C19
AP4423 is a 230 V, 16 A APC Rack ATS with two C20 source inlets, nine managed outlets and network-accessible monitoring. Confirm source independence, branch protection, outlet loading and the sensitivity setting before commissioning; AP4423A is Schneider Electric's stated replacement for the discontinued AP4423.
Compatibility: It powers 230 V single-corded rack equipment within the 16 A total rating and requires suitable C20 source cords plus C13/C19 load connections.
Configuration: Mount the unit in 1U rack space, connect two independent 230 V sources, observe the 16 A facility protection recommendation and configure network and transfer sensitivity settings.
Application: It is used in data-center and industrial-control racks to maintain power when the preferred AC source moves outside the selected range.
Lifecycle: Schneider Electric discontinued AP4423 on June 9, 2023 and identifies AP4423A as the replacement.
AP4423 is a 230 V, 16 A APC Rack ATS with two C20 source inlets, nine managed outlets and network-accessible monitoring. Confirm source independence, branch protection, outlet loading and the sensitivity setting before commissioning; AP4423A is Schneider Electric's stated replacement for the discontinued AP4423.
