Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel
      Bently Nevada 18745-04
      Bently Nevada 18745-04

      • ISO 9001:2015 Certified

        Our quality management system covers sourcing,testing and dispatch

      • View Our Success Stories

        Real stories from real customer orders
      In Stock
      Ships by Tuesday, September 22
      Fast Shipping Available
      Legacy 7200 Series Proximitor Sensor

      18745-04

      Product Information:

      Bently Nevada 18745-04 is a legacy 7200 Series Proximitor Sensor that conditions the signal from a matched non-contact proximity probe and extension cable. The system is used for shaft-vibration and position measurements, but correct operation depends on the complete 7200 transducer chain rather than the Proximitor alone.

      Product image is representative; revision or series may vary. Contact us to request a specific version.
      Get a Quote
      • One-year warranty
      • Global shipping
      • Exact-model verification
      WhatsApp: +86 180 2077 6792 Email parts team
      01


      Model Verified

      Model, revision and nameplate reviewed
      02


      Email confirmation

      You will get an email confirming that we have received your enquiry
      03


      Dedicated Account Manager

      One of our team will be in touch to confirm your part(s) specification and condition
      04


      Your quote

      You will receive a comprehensive quote tailored to your specific needs
        • PRODUCT OVERVIEW

          What is this product?

          Bently Nevada 18745-04 is a legacy 7200 Series Proximitor Sensor used to condition the signal from a matched non-contact proximity probe and extension cable. The complete transducer chain supports shaft-vibration and position measurements, so the probe, cable length, calibration, wiring and approval option must be verified together. The 7200 and 3300 XL systems are not mixed as individual drop-in components; modernization requires selection of a complete matched 3300 XL transducer system.

          Official source

          Bently Nevada legacy 7200 proximity-system documentation and 3300 XL transducer-system guidance.
        • APPLICATIONS

          Where it may be used

          Use 18745-04 only in the documented 7200 Series measurement chain whose probe, extension cable, monitor input and calibration match the installed channel. Confirm the mechanical target, probe gap, connector, wiring, shielding and approval requirements before replacement or service.

          Shaft-Vibration Channels

          Conditions a matched proximity-probe signal for radial shaft-vibration measurement.

          Position Measurement Points

          Supports compatible axial-position or displacement channels in the 7200 system.

          Legacy Loop Maintenance

          Restores service only after every element of the existing transducer chain is verified.

          Full-System Modernization

          Guides migration to a completely matched 3300 XL probe, cable and Proximitor set.
      Technical specifications for

      18745-04

      0 TECHNICAL PARAMETERS
      • Manufacturer:
        Bently Nevada
      • Product Category:
        Sensor
      • Product Family:
        7200 Series Proximity System
      • Component Type:
        Proximitor Sensor
      • Measurement Function:
        Non-contact vibration and position measurement
      • Signal Role:
        Conditions the proximity-probe signal
      • Transducer Matching:
        Verify probe, extension cable and Proximitor as a matched chain
      • Compatibility Basis:
        Complete 7200 transducer-system identity
      • Upgrade Approach:
        Replace with a fully matched 3300 XL transducer system
      • 04 option:
        For combined probe and extension cable system length of 9 metres (29.6 feet)
      • Stock Availability:
        4
      Ask for Quote
      WHAT HAPPENS NEXT?

      From enquiry to delivery

      Six clear steps show what information is required and what the written quotation will contain.
      • 01

        Find the product

        Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
      • 02

        Provide the details

        Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
      • 03

        Review the quotation

        Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
      • 04

        Confirm the order

        Accept the quotation in writing and complete the required payment before shipment.
      • 05

        Pay by bank transfer

        Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
      • 06

        Verify and dispatch

        The item receives a pre-shipment inspection and suitable protective packaging. Functional testing is performed only where appropriate equipment and procedures are available for the specific item. We confirm the applicable inspection scope and provide tracking after dispatch.
      Request a Verified Quote
      BUYER INFORMATION

      Product condition level information

      Commercial details are confirmed in writing before payment.
      • 01

        Factory Sealed

        Unused product with the original factory seal intact; packaging age or storage marks may still be present.

        view
      • 02

        Original Pack

        Unused product in original manufacturer packaging that was not originally factory sealed.

        view
      • 03

        Factory New

        New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

        view

      Alternative Names

      Bently Nevada 18745-04 18745 04 7200 Series 18745-04 Proximitor 18745-04 Proximitor Sensor Bently Nevada 7200 Proximitor 18745-04 7200 Proximity System 18745-04 18745 Option 04 18745-04 Legacy Proximitor 18745-04 7200 System Sensor

      Information

      Overview Manuals Transducer Chain Installation Checks 3300 XL Migration

      Features:

      • Legacy 7200 Series Proximitor Sensor for non-contact proximity measurements
      • Operates only as part of a matched probe, extension cable and Proximitor chain
      • Supports compatible shaft-vibration and position measurement channels
      • Modernization requires a fully matched 3300 XL transducer system

      18745-04 must be verified by its complete label, approval option, probe identity, extension cable, installed system length and monitor interface before replacement.

      Official source: Bently Nevada legacy 7200 and 3300 XL proximity-system documentation.
      Bently Nevada 18745-04 legacy 7200 Series technical references and Moore Automated resources.Important Notice: Other accessories, manuals, cables, calibration data, software, licenses and related items are not included unless listed in the stock item description. All prices are shown in USD.

      Matched system requirement

      The 7200 probe, extension cable and 18745-04 Proximitor form one calibrated measurement chain. Do not mix individual components solely because the connectors appear compatible.

      Wiring, gap and monitor scaling

      Confirm connector condition, wiring polarity, shield and grounding practice, power supply, monitor input and the correct probe gap before returning the measurement channel to service.

      Complete-system replacement

      Select a fully matched 3300 XL probe, extension cable and Proximitor after confirming probe diameter, system length, target material, mounting geometry and monitoring-channel requirements.

      Technical notes

      Bently Nevada 18745-04 is a legacy 7200 Series Proximitor Sensor used within a matched non-contact proximity transducer system. Correct operation depends on the exact probe, extension cable, Proximitor calibration and approval option; individual 7200 and 3300 XL components must not be mixed solely because connectors appear compatible. For modernization, verify the installed machine geometry and replace the complete measurement chain with a properly matched 3300 XL transducer system.

      18745-04 System Identity Check

      Confirm the full 18745-04 marking, approval option 04, 7200 Series probe part number, extension-cable part number and monitor interface. If any label or transducer-chain identifier is uncertain, provide nameplate and connector photographs before quotation.

      Legacy Proximitor Quotation Inputs

      Provide quantity, complete 18745-04 code, Proximitor and probe nameplate photographs, extension-cable identity, host monitor, installed system length, receiving country and required delivery date so Moore Automated can verify the complete 7200 transducer chain and quote accurately.

      Customs & shipping dimensions / weight

      • Packed shipping dimensions
        Confirmed after final packing
        Confirmed from the supplied-item packing record.
      • Packed shipping weight
        Confirmed after final packing
        Confirmed from actual-item weighing.
      • HS / customs code
        Not officially confirmed
        Verify the destination-country classification before shipment.
      • Country of origin
        Not officially confirmed
        Verify from the supplied-item nameplate or COO.
      • Ships from
        Xiamen, Fujian, China
        Dispatch location is confirmed in the written quotation.
      • Customs documents
        Confirmed for the destination
        Available document scope is stated in the written quotation.
      PRODUCT & ORDER FAQS

      Questions buyers ask about 18745-04

      • How can an exact 18745-04 Proximitor be identified?

        Confirm the complete 18745-04 marking, 7200 Series identity and approval option 04 on the label. If the tag is damaged or incomplete, send a clear nameplate and connector photograph before quotation.

      • Which probe and cable are compatible with 18745-04?

        It must be used with the exact 7200 Series proximity probe and extension cable specified for the installed transducer system. Probe, cable and Proximitor calibration must be verified as one matched chain.

      • What measurements use this 7200 Series unit?

        The 7200 proximity system supports non-contact shaft vibration and position measurements on compatible rotating machinery. The monitor input, mechanical target and transducer calibration must match the installed design.

      • What must be checked during 18745-04 installation?

        Verify the probe and extension-cable identities, connector condition, wiring polarity, shield and grounding practice, power supply, monitor scaling and correct probe gap before returning the channel to service.

      • Is 18745-04 still an active Bently Nevada product?

        No. The 7200 Series is a legacy, discontinued product family. Bently Nevada modernization normally requires a complete matched 3300 XL transducer system after engineering verification.

      • Can current stock be confirmed for this legacy part?

        Availability is limited to verified legacy inventory. Provide the full model, quantity and a nameplate photo so Moore Automated can confirm the exact part and condition in the quotation.

      • What warranty applies to the supplied 18745-04?

        Moore Automated supplies the quoted 18745-04 with a one-year warranty, subject to the written quotation and standard warranty terms.

      • How should a 3300 XL upgrade be planned?

        Do not replace only one 7200 component with a 3300 XL part. Confirm probe diameter, extension length, system length, target material, mounting geometry, monitor interface and then select the complete matched 3300 XL chain.
      All FAQ
      MORE PARTS IN THE SAME PROJECT?

      Search another part number

      Use the exact manufacturer number where possible.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          SEE PRODUCTS IN SEARCH PAGE ()
          WHY BUYERS WORK WITH MOORE AUTOMATED

          Clear checks before you commit

          Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.

          • Pre-shipment inspection

            Products are inspected before dispatch to verify model, condition and applicable specifications.

          • Documentation available

            Product photos, packaging photos, certificates and datasheets can be provided when available.

          • Clear commercial terms

            Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.

          • 20+ years of experience

            Over 20 years of experience in industrial automation and hard-to-source legacy parts.

          • Product Lifecycle Stage

            Obsolete / Discontinued by OEM

            The Bently Nevada 7200 Series is a legacy platform. A modernization project should use a complete matched 3300 XL proximity transducer system selected after probe, cable, system length, target material and monitor input are verified. Moore Automated supplies quality Bently Nevada legacy spares and engineered replacement options to help reduce downtime.

          Related Products

          Browsing history

          Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
          Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

          Get a quick price for:

          18745-04
          Quantity
          Upload
          (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
          Get a Quote
          For more information on how your data is processed and stored by Moore Automated please read our privacy policy.
          img0
          img0