Overview
Manuals
Main Features
Key Applications
Features:
- 200152 Accelerometers
- Accelerometer Interface Standard Cable, Connector on Accelerometer End Only
- All specifications are at +25°C (+77°F), unless otherwise specified
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs.The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 200152-15-00 Bently Nevada Accelerometer Interface Standard Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200152-15-00 Accelerometer Interface Standard Cable Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
- Vibration Signal Transmission: This cable is designed for connecting Trendmaster 2000 and Trendmaster Pro seismic accelerometers (such as the 200150, 200155, and 200157 series) and their corresponding interface modules.
- Seismic Monitoring: Used in systems that measure vibrations in machine housings or bearing housings to detect common mechanical faults such as imbalance and misalignment.
- Monitor Connection: Its connector is only located on the accelerometer end (the other end has a blunt cutout), making it ideal for direct connection to proTIM-R modules or 1900/25 and 1900/27 monitors.
