Overview
Manuals
Main Features
Primary Applications
Features:
- 200152 Accelerometers
- Accelerometer Interface Standard Cable, Connector on Accelerometer End Only
- All specifications are at +25°C (+77°F), unless otherwise specified
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs.The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 200152-15-10 Bently Nevada Accelerometer Interface Standard Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200152-15-10 Accelerometer Interface Standard Cable Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
This cable allows general-purpose Bently Nevada 20015x series accelerometers (such as 200150, 200155, or 200157) to be directly connected to a Sensor Interface Module (TIM) or a distributed vibration monitor.
Typical structural monitoring applications include: Trendmaster ProTIM systems: Enclosure sensors are typically connected to Trendmaster ProTIM to scan the health status of numerous plant installations.
Distributed vibration monitors: Seismic sensors are connected to compact field monitors, such as the Bently Nevada 1900/25 and 1900/27 standalone modules.
Equipment types: Mounted on general-purpose balancing equipment, small to medium-sized industrial pumps, air compressors, fans, and rolling bearing housings.
