Overview
Manuals
Accessory Function
System Compatibility
Service Checks
Features:
- The documented probe tip material is Polyphenylene sulfide (PPS); verify this construction against the machine environment, mounting arrangement and required protection level.
- The documented probe case material is AISI 303 or 304 stainless steel (SST); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented operating and storage temperature is -52°C to +177°C (-62°F to +350°F); use this value when checking the monitor configuration, operating limits and expected measurement response.
148722-01 is a Bently Nevada 3300 XL test plug for the 3300 system. It supports the specified setup or maintenance task in a matched installation. Key specifications: Probe Tip Material: Polyphenylene sulfide (PPS); Probe Case Material: AISI 303 or 304 stainless steel (SST). Match the full order code and hardware before replacement.
Confirm the complete 148722-01 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The exact 148722-01 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 148722-01 3300 XL test plug manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 148722-01 only with the documented signal type and connection arrangement. Retained facts: Probe Tip Material: Polyphenylene sulfide (PPS); Probe Case Material: AISI 303 or 304 stainless steel (SST); Operating and Storage Temperature: -52°C to +177°C (-62°F to +350°F). Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
