Overview
Manuals
Voltage Interface
Rack Review
Startup Review
Features:
- Power Supply module for the documented Foxboro I/A Series and Foxboro Evo.
- Input Frequency Range: 47 to 63 Hz.
- Voltage: 120/240 V ac OR 125 V dc.
FPS400-24 P0922YU belongs to the Foxboro I/A Series and Foxboro Evo and performs the documented power supply module role in the Foxboro I/A Series and Foxboro Evo distributed control architecture. The retained technical evidence records Input Frequency Range: 47 to 63 Hz; Voltage: 120/240 V ac OR 125 V dc; Operating TEMPERATURE: –30 to 71°C (–58 to +160°F). The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Foxboro I/A Series and Foxboro Evo receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release. The FPS400-24 P0922YU Power Supply module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
The FPS400-24 P0922YU may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
FPS400-24 P0922YU English documentation and reference links.
Important Notice: Confirm the complete catalog identity, hardware revision, receiving-system configuration and required document revision before replacement.
Voltage Interface: FPS400-24 P0922YU performs the power supply module function within the Foxboro I/A Series and Foxboro Evo. The retained documentation identifies input frequency range as 47 to 63 Hz; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Rack Review: approve FPS400-24 P0922YU only for the documented Foxboro I/A Series and Foxboro Evo distributed control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing FPS400-24 P0922YU.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
