Overview
Manuals
Key Features
Core Applications
Features:
- 3300 XL 8 mm Proximity Probes
- 3300 XL 8 mm Proximity Transducer System
- 330104 3300 XL 8 mm Probe, M10 x 1 thread,with armor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable4 with other nonXL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
The 330104-04-10-50-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-04-10-50-02-05 3300 XL 8 mm Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Internal Mechanical Mounting: The 100mm long probe housing and 40mm unthreaded probe tip are ideal for penetrating thick bearing supports, oil guide plates, or internal mechanical housings where standard short probes cannot reach the shaft.
Harsh Physical Environments: The flexible stainless steel armored casing protects the internal perfluoroalkoxyethylene (PFA) insulated cables from hot oil splashes, abrasive debris, abrasive dust, and accidental crushing during maintenance.
Target Mechanical Configurations: Widely used in critical rotating equipment such as centrifugal compressors, steam/gas turbines, turboexpanders, and high-pressure process pumps.
Measurement Types: Offers a standard 2mm (80 mil) linear measurement range. Can be used to track radial vibration (dynamic trajectory of the shaft), axial position (thrust surface wear tracking), or capture velocity pulses as a critical phasor reference.
