Overview
Manuals
Remote Mounting Reach
Compact Signal Path
Quick-Connect Interface
Features:
- The documented value for unthreaded length is 0.0 in; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented value for overall case length is 4.0 in; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented value for total length is 1.0 meter (3.3 feet); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330101-00-40-10-01-00 is a Bently Nevada 3300 XL 8 mm Proximity Probe for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Unthreaded Length: 0.0 in; Overall Case Length: 4.0 in. Match the full order code and hardware before replacement.
The Bentley Nevada 330101-00-40-10-01-00 is an 8 mm eddy current probe with a 3/8-24 UNF threaded interface, a 4.0-inch fully threaded housing (unarmored), and comes with a 1.0-meter cable and a ClickLoc miniature coaxial connector. This precision non-contact sensor is calibrated by default for AISI 4140 steel and is designed for high-precision measurement of axial displacement and vibration.
The 330101-00-40-10-01-00 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-40-10-01-00 3300 XL 8 mm Proximity Probe manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330101-00-40-10-01-00. Retained facts: Unthreaded Length: 0.0 in; Overall Case Length: 4.0 in; Total Length: 1.0 meter (3.3 feet). Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
