Overview
Manuals
Basic Info
Ordering Information
Use Cases
Features:
- 3300 XL 8 mm Proximity Probes
- 3300 XL 8 mm Proximity Transducer System
- 330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
The 3300 XL probe and extension cable also reflect improvements over previous designs. A patented TipLoc molding method provides a more robust bond between the probe tip and the probe body. The probe’s cable incorporates a patented CableLoc design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip.
8 mm probes provide a thicker encapsulation of the probe coil in the molded PPS plastic probe tip. This results in a more rugged probe. The larger diameter of the probe body also provides a stronger, more robust case. We recommend that you use 8 mm probes when possible to provide optimal robustness against physical abuse.
The 330101-02-70-10-11-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-02-70-10-11-05 3300 XL 8 mm Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 330101-02-70-10-11-05
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 3300 XL 8 mm Proximity Transducer System
3300 XL 8 mm Proximity Probes:
330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
330101-Axx-Bxx-Cxx-Dxx-Exx
A: Unthreaded Length
Order in increments of 0.1 in.
Length configurations:
Maximum unthreaded length: 8.8 in.
Minimum unthreaded length: 0.0 in.
Example: 0 4 = 0.4 in.
B: Overall Case Length
Order in increments of 0.1 in.
Standard thread configurations:
Maximum case length: 9.6 in.
Minimum case length: 0.8 in.
Example: 2 4 = 2.4 in.
C: Total Length
05: 0.5 meter (1.6 feet)
10: 1.0 meter (3.3 feet)
15: 1.5 meter (4.9 feet)
20: 2.0 meters (6.6 feet)
30: 3.0 meters (9.8 feet)
50: 5.0 meters (16.4 feet)
90: 9.0 meters (29.5 feet)
D: Connector and Cable-Type
01: Miniature coaxial ClickLoc connector with connector protector, standard cable
02 Miniature coaxial ClickLoc connector, standard cable
11: Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
12: Miniature coaxial ClickLoc connector, FluidLoc cable
E: Agency Approval Option
00: Not required
05: CSA, ATEX, IECEx Approvals
Bearing Wear Tracking: Mounted directly within the hydrodynamic (sliding) bearing housing, used to measure the rapid dynamic trajectory of a rotating shaft.
Dual Probe Configuration: Typically installed in pairs, spaced 90° apart (orthogonal X and Y axes). This dual probe configuration allows predictive maintenance teams to map the shaft's trajectory and detect problems such as rotor imbalance, shaft misalignment, or structural loosening immediately before catastrophic failures occur.
Rotor Drift Prevention: Mounted on the shoulder or end face of a rotating shaft to measure minute displacements along its longitudinal axis.
Thrust Bearing Protection: Critical for tracking wear on internal axial thrust bearings. If process shocks cause excessive axial forward or backward drift, this probe can detect this displacement immediately, allowing monitoring equipment to trip the machine before the rotating blades collide with the stationary stator.
Phase Reference Timing: Directly aligned with machined grooves, keyways, or protrusions on the shaft.
Dynamic Analysis: Triggers a transient voltage each time the groove passes the probe tip. This single-pulse signal, which occurs once per revolution, provides accurate reference values for rotational speed (RPM) and critical phase angle, and can be used to filter vibration data into precise 1x, 2x, or subsynchronous frequency components.
