Overview
Manuals
Signal Conditioning
Probe & Cable Match
Bias Commissioning
Features:
- The documented value for capacitance is 69.9 pF/m (21.3 pF/ft) typical; retain this specification when matching the exact 3300 xl proximitor sensor and installed Bently Nevada 3300 hardware.
- The documented value for frequency response is (0 to 10 kHz), +0, -3 dB, with up to 305 meters (1000 feet) of field wiring; use this value when checking the monitor configuration, operating limits and expected measurement response.
- The documented value for probe tip material is Polyphenylene sulfide (PPS); verify this construction against the machine environment, mounting arrangement and required protection level.
330180-045-01-00 is a Bently Nevada 3300 XL Proximitor Sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Capacitance: 69.9 pF/m (21.3 pF/ft) typical; Probe Tip Material: Polyphenylene sulfide (PPS). Match the full order code and hardware before replacement.
Confirm the complete 330180-045-01-00 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The exact 330180-045-01-00 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330180-045-01-00 3300 XL Proximitor Sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330180-045-01-00 only with the documented signal type and connection arrangement. Retained facts: Capacitance: 69.9 pF/m (21.3 pF/ft) typical; Frequency Response: (0 to 10 kHz), +0, -3 dB, with up to 305 meters (1000 feet) of field wiring; Probe Tip Material: Polyphenylene sulfide (PPS). Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
