Overview
Manuals
General Information
Model Information Guide
Plant Asset Applications
Features:
- PROXPAC XL Proximity Transducer
- Similar to our 31000/32000 Proximity Probe Housing Assemblies
- Made of Polyphenylene Sulfide (PPS), which is an advanced, molded thermoplastic
The assembly offers the same advantages and features as the 31000 and 32000 housings for accessing and externally adjusting proximity probes. However, the housing cover of the PROXPAC XL Assembly also contains its own 3300 XL Proximitor sensor.
This design makes the PROXPAC XL Assembly a completely self-contained proximity probe system, and eliminates the need for an extension cable between the probe and its associated Proximitor sensor. It also eliminates the need for a separate Proximitor housing, as the field wiring connects directly between the monitors and PROXPAC XL Assemblies.
The 330880-28-15-042-00-02 Bently Nevada PROXPAC XL Proximity Transducer may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330880-28-15-042-00-02 PROXPAC XL Proximity Transducer Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 330880-28-15-042-00-02
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: PROXPAC XL Proximity Transducer Assembly
PROXPAC XL Proximity Transducer
330880-Axx-Bxx-Cxxx-Dxx-Exx
A: Probe and Approvals
0 0: No probe; Proximitor sensor without approvals
0 1: No probe; Proximitor sensor with Multiple Approvals
1 6: 3300 XL 8 mm probe without approvals
2 8: 3300 XL 8 mm probe with Multiple Approvals
B: Standoff Adapter (B Dimension)
Order in increments of 0.5 in (13 mm).
Minimum length: 1.5 in (38 mm)
Maximum length: 7.5 in (191 mm )
Examples:
0 0: No standoff adapter
1 5: 1.5 in (38 mm)
C: Probe Penetration (C Dimension)
For penetration lengths between 1.0 and 2.0 inches, counterbore may be required in machine case to reduce probe side view and/or rear view effects.
Order in increments of 0.1 in (2 mm).
Minimum length: 1.0 in (25 mm)
Maximum length: 30 in (762 mm )
Examples:
0 0: 0 No probe sleeve
0 3 7: 3.7 in (94 mm)
D: Fittings
0 0: No fittings; two plugs and two washers
0 1: One 3/4-14 NPT fitting, two plugs
0 2: Two 3/4-14 NPT fittings, one plug
0 3: One 3/4-14 NPT fitting, one 3/4-14 NPT to 1/2-14 NPT SST reducer and two plugs
E: Mounting Thread
0 0: No outer sleeve assembly
0 2: 3/4-14 NPT (Required if ordering Standoff Adapter Option.)
0 5: 7/8-14 UNF-2A
PROXPAC components are widely used in outdoor or freestanding rotating machinery because they allow technicians to access, calibrate, and mechanically adjust internal probes from the outside without opening the machinery housing.
Common applications include: cooling tower fan gearboxes and drive shafts; large wastewater treatment pumps; industrial air-cooled heat exchangers (finned fans); and remote chemical process turbo compressors.
