Overview
Manuals
Principle
Primary Industrial Applications
Features:
- Standard Armored Interconnect Cable
- 330500 Velomitor Piezo-velocity Sensor
- Bently Nevada Machinery Condition Monitoring
Two-conductor twisted, shielded 22 AWG cable with two-socket moistureresistant female connector at one end, terminal lugs at the other end. Used with monitors. Not for use with 21128 Velocity Transducer Housing. Min. length: 2.0 ft (0.6 m) and Max. length: 99 ft (30 m).
Most common machine failures (imbalance, misalignment, etc.) occur on the rotor and stem from an increase (or at least a change) in rotor vibration. For any single housing measurement to effectively protect the entire machine, the system must continuously transmit a significant amount of rotor vibration to the machine housing or the sensor's mounting location.
The 9571-66 Bently Nevada Interconnect Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 9571-66 Interconnection Cables Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Bently Nevada Velomitor piezoelectric velocity sensor is designed to measure the absolute vibration (relative to free space) of a bearing housing, enclosure, or structure. The 330500 is a dedicated piezoelectric accelerometer featuring a solid-state design and integrated embedded electronics. Because the 330500 uses solid-state electronics and has no moving parts, there is no mechanical degradation or wear, and it can be mounted vertically, horizontally, or at any other angle.
- Condition Monitoring: Serves as a critical connection between rotating machinery sensors and centralized monitoring racks (such as the 3500 Series) for tracking equipment health.
- Vibration Analysis: Typically used in conjunction with sensors such as Velomitor piezoelectric velocity sensors or accelerometers to detect mechanical faults, such as imbalances or bearing wear.
- Remote Signal Transmission: The 66-foot length is ideal for large industrial plants (such as power plants and refineries) where sensors on turbines or compressors are often located far from local junction boxes.
