Request a Parts Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
ABB PM860AK01 3BSE066495R1
ABB PM860AK01 3BSE066495R1
ABB PM860AK01 3BSE066495R1
ABB PM860AK01 3BSE066495R1
ABB PM860AK01 3BSE066495R1
ABB PM860AK01 3BSE066495R1
  • ISO 9001:2015 Certified

    Our quality management system covers sourcing,testing and dispatch
  • View Our Success Stories

    Real stories from real customer orders
In Stock
Ships by Thursday, November 5
Fast Shipping Available
Processor unit

PM860AK01 3BSE066495R1

Product Information:

PM860AK01 3BSE066495R1 is an ABB processor unit used with the documented Advant AC800M platform. Selection must match the complete product identity, hardware execution, connected assemblies and approved system configuration.

Before replacing PM860AK01 3BSE066495R1, compare the supplied nameplate, revision, connectors or terminals and installed position with the original equipment record. After installation, review diagnostics and complete the approved functional checks before service.

Product image is representative; revision or series may vary. Contact us to request a specific version.
  • One-year warranty
  • Global shipping
  • Exact-model verification
    • PRODUCT OVERVIEW

      What is this product?

      ABB identifies PM860AK01 3BSE066495R1 as a 48 MHz PM860A processor unit in the AC 800M controller family. It provides 16 MB RAM, including 10.346 MB available for the application, and uses the MPC860 processor architecture documented by ABB. The unit supports 2 Ethernet channels, up to 12 CEX-Bus communication modules and maximum 96 non-redundant i/o modules. This version is intended for non-redundant CPU configurations. Selection must be based on the complete 3BSE066495R1 article number, CPU type, control-software version and installed bus configuration.

      Source boundary

      Exact-model hardware values shown here are qualified from public technical cross-references and require order-stage confirmation.
    • APPLICATIONS

      Where it may be used

      The following contexts apply only after PM860AK01 3BSE066495R1, its software level, bus layout and non-redundant controller role have been verified.

      Power Generation

      Used in ABB automation and control systems that support generation equipment, auxiliaries and plant monitoring.

      Oil and Gas

      Applied in process-control installations for pumping, compression, measurement and safety-related operations.

      Chemical Processing

      Supports ABB control and instrumentation systems used for regulated process monitoring and automation.

      Water and Wastewater

      Used in treatment, pumping and distribution systems that depend on reliable industrial automation.
Technical specifications for

PM860AK01 3BSE066495R1

0 TECHNICAL PARAMETERS
  • Manufacturer:
    ABB
  • Product Category:
    DCS Systems
  • Product type:
    Processor unit
  • CPU module:
    PM860A
  • Clock frequency:
    48 MHz
  • Memory (RAM):
    16 MB
  • RAM available for application:
    10.346 MB
  • Processor type:
    MPC860
  • High Integrity controller:
    No
  • Flash storage for application and data:
    Yes
  • CPU redundancy support:
    No
  • Redundant switch-over time:
    Not applicable
  • Performance, 1000 Boolean operations:
    0.23 ms
  • Power supply:
    24 VDC (19.2 to 30 VDC)
  • Power consumption, typical / maximum:
    180 / 300 mA
  • Typical power dissipation:
    4.32 W
  • Ethernet channels:
    2
  • Communication modules on CEX-Bus:
    12
  • ModuleBus I/O capacity:
    maximum 96 non-redundant I/O modules
  • Stock Availability:
    2
WHAT HAPPENS NEXT?

From enquiry to delivery

Six clear steps show what information is required and what the written quotation will contain.
  • 01

    Find the product

    Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
  • 02

    Provide the details

    Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
  • 03

    Review the quotation

    Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
  • 04

    Confirm the order

    Accept the quotation in writing and complete the required payment before shipment.
  • 05

    Pay by bank transfer

    Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
  • 06

    Verify and dispatch

    The item receives a pre-shipment inspection and suitable protective packaging. Functional testing is performed only where appropriate equipment and procedures are available for the specific item. We confirm the applicable inspection scope and provide tracking after dispatch.
BUYER INFORMATION

Product condition level information

Commercial details are confirmed in writing before payment.
  • 01

    Factory Sealed

    Unused product with the original factory seal intact; packaging age or storage marks may still be present.

  • 02

    Original Pack

    Unused product in original manufacturer packaging that was not originally factory sealed.

  • 03

    Factory New

    New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

Alternative Names

PM860AK01 3BSE066495R1 PM860AK01 3BSE066495R1 PM860A processor unit

Information

Overview Manuals Execution Capacity Configuration Single-CPU Expansion Limits

Features:

  • The documented product type is Processor unit, and this value must match the supplied unit.
  • The documented cpu module is PM860A, and this value must match the supplied unit.
  • The documented clock frequency is 48 MHz, and this value must match the supplied unit.
ABB PM860AK01 3BSE066495R1 is a Processor unit documented for the applicable Advant AC800M system configuration. Its recorded specification includes product type Processor unit, cpu module PM860A, clock frequency 48 MHz. Correct selection depends on the complete article identity, installed equipment, mechanical or electrical interfaces and the documented configuration rather than appearance alone. Using the exact model helps maintenance teams avoid incompatible revisions, connector arrangements and application variants.

Before installing PM860AK01 3BSE066495R1, record the original nameplate, installed position, connected assemblies and every relevant configuration detail. Compare the supplied unit with the existing hardware and applicable ABB service documentation, isolate all affected energy sources and preserve required settings or calibration data. After installation, inspect each affected interface and complete controlled functional checks before returning the equipment to service.

The PM860AK01 3BSE066495R1 ABB Processor unit is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.

ABB PM860AK01 3BSE066495R1 documentation and reference links.

Important Notice: Every linked document must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.

PM860A Execution Capacity

PM860A delivers 48 MHz processing, 16 MB RAM and 10.346 MB available for application use.

Dual-Ethernet Configuration

Preserve both Ethernet channel settings, the control-network design and the saved controller hardware configuration.

Single-CPU Expansion Limits

The CPU is non-redundant but supports up to twelve CEX-Bus communication modules and ninety-six local ModuleBus I/O modules.

Technical notes

PM860AK01 3BSE066495R1 is an ABB AC 800M processor unit built around the PM860A CPU, with a 48 MHz clock, 16 MB RAM and 10.346 MB available for the control application. ABB documents 2 Ethernet channels, 12 supported CEX-Bus communication modules, non-redundant CPU operation, a 24 VDC supply and IP20 construction. Replacement engineering must verify article number 3BSE066495R1, firmware and control-system version, the ModuleBus/CEX-Bus layout and every redundant-partner detail before installation.

PM860AK01 Controller Identity Audit

Confirm the complete PM860AK01 3BSE066495R1 identity, article number 3BSE066495R1, PM860A nameplate, CPU or hardware revision, processor-unit kit contents and the installed non-redundant controller arrangement. If any marking is unclear, provide close photos of the front label, side label and connections.

PM860A Quotation Data Checklist

For an accurate quotation, provide quantity, the complete PM860AK01 3BSE066495R1 and 3BSE066495R1 identity, nameplate photos, controller software version, CEX-Bus and ModuleBus configuration, receiving country and required delivery date. Moore Automated will use these records to match the exact processor unit.

Customs & shipping dimensions / weight

  • Packed shipping dimensions
    Confirmed after final packing
    Approx. 11.9 x 18.6 x 13.5 cm
  • Packed shipping weight
    Confirmed after final packing
    Approx. 1.10 kg
  • HS / customs code
    Indicative HS code 85371091
    Final destination-specific classification requires customs confirmation
  • Country of origin
    Sweden
    Confirmed from ABB product documentation
  • Ships from
    Xiamen, Fujian, China
    Dispatch location confirmed in the written quotation
  • Customs documents
    Confirmed for the destination
    Available document scope stated in the written quotation
PRODUCT & ORDER FAQS

Questions buyers ask about PM860AK01 3BSE066495R1

  • What hardware identity separates PM860AK01 3BSE066495R1 from nearby AC 800M CPUs?

    The exact order is PM860AK01 with ABB article 3BSE066495R1 and a PM860A CPU. It is a 48 MHz, non-redundant processor unit. A PM861A or another 48 MHz AC 800M unit is not equivalent because redundancy capability, application memory and article identity differ.
  • If my PM860AK01 does not boot correctly, what should I provide for warranty support?

    Send the PM860AK01/3BSE066495R1 and serial photographs, received-condition record, measured 24 VDC supply, RUN/ERROR indications and the controller configuration used for the test. These details allow Moore Automated to assess the one-year independent-supplier warranty without treating an unsupported project or network setting as a confirmed processor defect.
  • Do the two Ethernet ports mean PM860AK01 can form a redundant CPU pair?

    No. ABB explicitly lists CPU redundancy as unsupported for PM860A. The two Ethernet channels support Control Network connectivity; they do not turn two PM860AK01 units into a synchronized redundant controller pair. Select a redundancy-capable CPU family when controller failover is required.
  • Can an application use all 16 MB of PM860A RAM?

    No. The cited ABB data gives 16 MB total RAM from System 800xA 5.1 FP4 onward but 10.346 MB available for the application. Project sizing must use the available-application figure and also leave capacity for execution, communication and online changes.
  • How much local ModuleBus I/O can one PM860AK01 serve?

    The non-redundant PM860A arrangement supports one electrical plus seven optical ModuleBus clusters and up to 96 I/O modules. The scan interval is configurable from 0 to 100 ms and depends on the actual I/O count, so the 96-module ceiling is not a guaranteed scan-performance value.
  • Can you ship my PM860AK01 by FedEx, DHL, or UPS, and may I use my own courier account?

    Tell us the destination, postcode, preferred service and whether you have a courier account that should be billed. The package normally includes a 3.6 V lithium memory-backup battery, so carrier acceptance and documentation are checked before dispatch. Moore can quote FedEx, DHL, UPS or another nominated option using the final packed shipment.
  • Are the PM860A Ethernet ports 100 Mbit/s because ABB recommends a 100 Mbit/s backbone?

    No. Each controller Ethernet interface is 10 Mbit/s according to the ABB table. The separate recommendation is a 100 Mbit/s switched Control Network backbone. Port speed and backbone design are different specifications and should not be entered as the same value.
  • Which items should be checked in a stocked PM860AK01 package?

    Verify photographs of the PM860AK01/3BSE066495R1 label and PM860A CPU, then confirm the TP830 baseplate, TB850 CEX-bus terminator, TB807 ModuleBus terminator and memory-backup battery in the written supply list. Communication modules, software licenses and field wiring are separate unless quoted.
MORE PARTS IN THE SAME PROJECT?

Search another part number

Use the exact manufacturer number where possible.
WHY BUYERS WORK WITH MOORE AUTOMATED

Clear checks before you commit

Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.
  • Pre-shipment inspection

    Products are inspected before dispatch to verify model, condition and applicable specifications.
  • Documentation available

    Product photos, packaging photos, certificates and datasheets can be provided when available.
  • Clear commercial terms

    Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.
  • 20+ years of experience

    Over 20 years of experience in industrial automation and hard-to-source legacy parts.
  • Product Lifecycle Stage

    Active / Available from OEM

    Moore Automated supplies ABB PM860AK01 3BSE066495R1 Processor unit hardware subject to exact-model and revision verification. Every supplied unit is inspected before shipment, and the included accessories, condition and receiving-system requirements are confirmed in the written quotation.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

Get a quick price for:

PM860AK01 3BSE066495R1
Quantity
Upload
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Moore Automated please read our privacy policy.