Overview
Manuals
General Information
Ordering Information
Applications
Features:
- 200150, 200155 and 200157 Accelerometers
- Bently Nevada Machinery Condition Monitoring
- General Purpose Trendmaster 2000 or Trendmaster Pro Accelerometer
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 200151-60-03-10 Bently Nevada Accelerometers may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200151-60-03-10 Accelerometers Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 200151-60-03-10
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 200150, 200155 and 200157 Accelerometers
200151-Axx-Bxx-Cxx
Accelerometer Interface Standard Cable, Connectors on Both Ends
A: Cable Length
20: 2.0 meters
40: 4.0 meters
60: 6.0 meters
B: Armor Option
02: Blue cable without armor
03: Blue cable with armor
C: Coupling Nut
00: Standard coupling nut
02: Nylon coupling nut
10: Enhanced coupling nut. This option provides a better grip for
tightening the cable to the accelerometer and is provided
on both ends of the cable
This sensor is widely used in the oil, chemical, and power industries for high-frequency pressure monitoring and early fault prevention in fluid lines and cylinders of pumps, compressors, turbines, and reciprocating machinery. Depending on the specific selection parameters, this model is ideal for the extreme physical and safety environments of industrial sites. The "60" option indicates that the sensor supports a dynamic full-range measurement range of up to 60 psi (approximately 4.14 bar), enabling it to capture minute pressure waveform changes in highly dynamic environments. The "03" option features a specific mechanical thread mounting interface (typically a universal NPT or metric high-pressure gas-tight thread) to ensure absolute sealing in high-pressure process piping. The final "10" option offers multiple explosion-proof certifications (such as ATEX and IECEx intrinsically safe explosion-proof ratings), allowing for safe deployment in hazardous industrial production areas containing flammable and explosive gases, vapors, or highly hazardous dusts. In real-world field operation, this dynamic pressure sensor demonstrates exceptional durability.
