Overview
Manuals
Ordering Code
Sensor Matching
Commissioning Guidance
Features:
- Bently Nevada 330180 identifies a 3300 XL Proximitor Sensor used with one compatible 3300-series 5 mm or 3300 XL 8 mm proximity probe and extension cable. In the X1 placeholder, X is the system-length selector and the final digit 1 identifies DIN-rail mounting; suffix 05 specifies CSA, ATEX and IECEx approvals.
- Confirm the complete nameplate code that replaces X with 1, 5 or 9 for the 1.0 m, 5.0 m or 9.0 m system length, verify DIN-mount option 1, approval option 05, modification identifier 143416-02, probe type and extension-cable length.
- Use it only in a matched 3300 XL 8 mm transducer chain for shaft vibration, axial position, Keyphasor reference or speed measurement where the complete system length and modification record are verified.
330180-X1-05 MOD：143416-02 is selected from the complete manufacturer identity and receiving-system evidence. Preserve the 35 mm DIN-rail arrangement, electrical isolation, field-wiring shield practice and probe-to-extension-cable length sum; verify the target material and gap from the machine record. Apply the documented negative DC supply, confirm the probe and extension cable form the selected total length, set the gap near -9 V DC where applicable, and check linear response and monitor indication before service.
Official source: Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM. The official data sheet supports the 330180 ordering structure, X-system-length interpretation, DIN mounting digit 1, approval suffix 05, electrical performance, temperature limits and 246 g sensor weight. It does not publicly define the exact purpose of MOD 143416-02.
330180-X1-05 MOD：143416-02 official technical documentation and verified Moore Automated resources.
Important Notice: Confirm the complete model, article number and installed configuration before replacement. All links open in a new page.
X is not a fixed length value: the completed first digit must be 1, 5 or 9 for a 1.0 m, 5.0 m or 9.0 m system. The following digit 1 means DIN-rail mount, and 05 means CSA, ATEX and IECEx approvals.
Probe cable length plus extension-cable length must equal the completed Proximitor system length. Use only documented 3300-series 5 mm or 3300 XL 8 mm components and retain the exact modification record.
Verify negative DC supply, shielded field wiring, target material, mechanical gap, output response and monitor indication. Do not assign an unverified function to MOD 143416-02.
