Overview
Manuals
Cable Length Code
Long-Range System
Routing Checks
Features:
- The documented cable length is 4.0 m (13.1 ft); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented armor configuration is 24; preserve this construction together with the complete order code and cable-routing requirements.
- The documented cable type is High-temperature FluidLoc; verify the connector interface, electrical length and matching 3300 signal-chain components before commissioning.
330854-040-24-00 is a Bently Nevada 3300 XL 25 mm extension cable for the 3300 system. It connects the probe to a compatible Proximitor Sensor. Key specifications: Cable Length: 4.0 m (13.1 ft); Armor and Cable Option: 24. Match the full order code and hardware before replacement.
330854-040-24-00 is a 4 m unarmored high-temperature FluidLoc extension cable for the 3300 XL 25 mm system, with no agency approvals. Pair it with a 1 m 330851 probe and a 5 m 330850 Proximitor Sensor.
The exact 330854-040-24-00 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330854-040-24-00 3300 XL 25 mm extension cable manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Review 330854-040-24-00 by complete length and construction code. Retained facts: Cable Length: 4.0 m (13.1 ft); Armor and Cable Option: 24; Cable Type: High-temperature FluidLoc. Do not change the calibrated total system length when replacing an extension or integral lead.
Match every connector, protector, armor or FluidLoc option and the receiving probe/Proximitor Sensor. Route the cable without sharp bends, crushing, connector side-load or contamination.
Inspect continuity and insulation where applicable, seat the connectors, compare channel bias with the recorded value and confirm stable vibration or position response before release.
