Overview
Manuals
Order-Code Mapping
Penetration Planning
Housing & Conduit
Features:
- The housing combines an option-34 3300 XL 8 mm probe, connector protector and multiple approvals in one ordered assembly.
- A 0.5 m probe lead, no standoff adapter and 5.6 in penetration define the installed reach.
- Cast-aluminum body with 304 stainless-steel sleeve, an O-ring dome and 3/4-14 NPT mounting thread establish the mechanical and environmental configuration.
Bently Nevada 21000-34-05-00-056-04-02 is a complete externally mounted proximity-probe housing assembly from the 21000/24701 family. Option 34 supplies a 3300 XL 8 mm probe with connector protector and the documented multiple-approval configuration. Cable option 05 gives a 0.5 m probe lead, option 00 omits the standoff adapter and penetration code 056 provides 5.6 in of probe penetration. The fitting block supplies one 3/4-14 npt plug, and final option 02 specifies a 3/4-14 NPT mounting thread. The sealed dome cover protects the probe connection while the threaded port, sleeve, fittings and penetration geometry establish the mechanical fit. Replacement selection must match every ordering block and the available machine-case depth, target location, conduit route and hazardous-area drawing.
Manufacturer reference: official 21000/24701 proximity-probe housings documentation.
Moore Automated supports exact-item verification and spare-part enquiries for 21000-34-05-00-056-04-02.
Bently Nevada 21000-34-05-00-056-04-02 Cast-aluminum probe housing assembly manual (Datasheet), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Confirm probe 34, cable 05, standoff 00, penetration 056, the fitting block and thread 02 as one mechanical identity.
Compare the 5.6 in probe reach with the machine-case depth, target position and required operating gap before installation.
Verify the 3/4-14 NPT mount, one 3/4-14 npt plug, O-ring dome access and the project sealing/bonding method.
