Overview
Manuals
General
Instruction
Verification of Total Loop Length
Features:
- 3300 XL 50 mm Extension Cable
- 3300 XL 50 mm Proximity Transducer System
- perfluoroalkoxyethylene (PFA) insulated FluidLoc probe cable in the following total probe lengths: 1, 5 or 9 meters
The 3300 XL 50 mm probe is designed to survive the harshest steam turbine DE environments. It can continually operate and maintain its accuracy in high temperatures up to 200°C (392°F), and can withstand intermittent high temperatures up to 250°C (482°F). The 50 mm probe has both a front and rear seal which, combined with the High Temperature FluidLoc cable (standard on all 50 mm probes), prevent moisture from entering the probe tip. Special high-temperature ClickLoc connectors are also standard on the probe and extension cable.
Each probe comes with connector protectors and a disposable connector protector installation tool to ensure that the connectors remain free of contamination. The ClickLoc connector on the probe lead features a removable collar that facilitates routing the cable through tight clearances.
The 330877-080-37-05 Bently Nevada 3300 XL 50 mm Extension Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330877-080-37-05 3300 XL 50 mm Extension Cable Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 330877-080-37-05
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 3300 XL 50 mm Proximity Transducer System
3300 XL 50 mm Extension Cable
330877-Axxx-Bxx-Cxx
A: Cable Length
0 4 0: 4.0 meters (13.1 feet)
0 8 0: 8.0 meters (26.2 feet)
B: Armor and Cable
3 6: FluidLoc cable
3 7: FluidLoc ext. cable w/ armor
C: Agency Approval
0 0: No Approvals
0 5: Multiple Approvals
Because this extension cable is exactly 8.0 meters long, it is essential to carefully check that it is only used with 1.0-meter integrated wire gauge proximity probes. Using an 8-meter armored extension cable with a 5-meter or 9-meter probe will alter the overall circuit length, causing significant scaling factor errors and potentially malfunctioning your 3500/40M proximity monitoring card.
