Overview
Manuals
Signal Conditioning
Probe & Cable Match
Bias Commissioning
Features:
- The documented system length is 7.0 m (23.0 ft); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented mounting option is DIN mount; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented agency approval option is BR country-specific approval option; the complete approval suffix must match the installation area and site requirements.
330980-71-BR is a Bently Nevada 3300 XL NSv Proximitor sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: System Length: 7.0 m (23.0 ft); Mounting Option: DIN mount. Match the full order code and hardware before replacement.
330980-71-BR is the DIN-rail version of the 7 m 3300 XL NSv Proximitor Sensor. It accepts a matched 3300 NSv or mechanically and electrically compatible 3300 RAM probe-and-extension-cable combination, operates from -17.5 to -26 Vdc without barriers at 12 mA maximum, and supports a 1.5 mm linear range with 7.87 V/mm nominal scale factor and 0 to 10 kHz typical frequency response.
The exact 330980-71-BR execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330980-71-BR 3300 XL NSv Proximitor sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330980-71-BR only with the documented signal type and connection arrangement. Retained facts: System Length: 7.0 m (23.0 ft); Mounting Option: DIN mount; Agency Approval Option: BR country-specific approval option. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
